[. . . ] The socket outlet shall be installed near the equipment and shall be easily accessible. [. . . ] Illustrations are representative only and may differ from the actual appearance. If it is not, a paper jam (error code E00/E0) or wrinkling of the output paper may occur in printing. Do not turn the power OFF until the adjustment for steps *58 to *61 "Automatic Gamma Adjustment for Printer PCL 600 dpi" is completed. The following adjustment should be performed according to the order to be completed correctly. (If there is no A4 (or LT) sized paper in any cassette, be sure to set it. Set the chart, facing down on the glass, in order that the 2 black solid rectangles be placed at the left side. Note: Theequipmentactivatesinthesetupmode automatically when the power is turned ON beforestep*58isfinishednormally. Set the chart, facing down on the glass, in order that 2 black solid rectangles be placed at the left side. [. . . ] Set the chart, facing down on the glass, in order that 2 black solid rectangles be placed at the left side. [. . . ]